COLLECTION NAME:
David Rumsey Historical Map Collection
Record
Author:
Coronelli, Vincenzo (1650-1718)
Date:
1698
Short Title:
(Gore 3, Celestial Globe)
Publisher:
Coronelli
Publisher Location:
Venice
Type:
Globe Gores
Obj Height cm:
22
Obj Width cm:
28
Subject:
Celestial
Full Title:
(Gore 3, Celestial Globe)
List No:
10714.005
Series No:
5
Publication Author:
Coronelli, Vincenzo (1650-1718)
Pub Date:
1698
Pub Title:
[Complete set of counterproof plates of globe gores and calottes for a 3.5-foot diameter celestial globe]
Pub Note:
"Exceedingly rare complete set of the counter-proof version of the engraved gores for Coronelli’s 3.5-foot celestial globe. This issue is before the addition of the engraved captions and figures; it was intended to show the heavens as they would appear to an observer on earth, as opposed to the conventional celestial globe that represents the stars as seen on an imaginary sphere from the outside. This copy is in exceptional original condition: a set of untrimmed sheets in their original binding, exactly as they would be received by a globe maker. On 7 December 1692 Sr Carlo Malavista, in a lecture on the development of astronomy at the Accademia Fisico-Matematica in Rome, described Coronelli’s globes as the most perfect yet produced. He ends his peroration with remarks on the difficulty of using a celestial globe. “Both these globes give to the eye the appearance of being equal, but they are not equally useful to the eyes of the mind, that is, the intelligence, because to express the earth on a globe can be very well done, because the earth is in the shape of a ball on which we walk. The sky on the other hand is the opposite of this. As we stand on the earth the sky is above us, and we observe it as concave and not convex.” It was the accepted convention, as Malavista pointed out, to depict the heavens on a celestial globe as they would appear to an observer beyond the heavens. Malavista continued: “To make it easier to understand, the illustrious Giovanni Ciampini, Director of the Academy, has thought fit to have the celestial globe of Coronelli divided into two halves in concave form, so that the stars are seen in their proper location, agreeing with the way we look at them in the sky...” This is the first record in print of Coronelli’s concave globes. When Coronelli issued in 1693 a new edition of the celestial globe with fewer names of constellations, he put the proposed innovation into practice by producing the globe in two versions, convex and concave. In Coronelli’s account of his travels of 1696-97, Viaggi d’Italia in Inghilterra (1697), a ‘Notice to the Public on the globes of Father Coronelli’ is appended to vol. II (pp. 204-5). This reports that the celestial globes have been printed, some in convex forms, some in concave form, and that they have been made in this way, not through the mistake of the author, as some so knowledgeable people thought, but for their greater usefulness. The Accademia degli Argonauti made the same point in 1704: “critics construed as a mistake” what was done with the greatest erudition and for the use of our astronomers, namely that our Cosmographer engraved the celestial globe in concave and convex...” A mounted example of the gores for the “concave” globe is recorded in the Bayerisches Nationalmuseum’ (Helen Wallis, preface to the facsimile edition of the Libro dei globi Venice 1693 (1701), Amsterdam 1(1969) p. ix. which omits 2 of the plates missing from the BL example reproduced here) This ‘concave’ version, as distinct from the more standard ‘convex version,’ was produced by counter-proofing the original plates, not by re-engraving them: A strongly inked impression of the ‘convex version’ would be made on a sheet of impermeable paper, and then a second impression immediately made from that sheet while the ink was still wet, so that the plate image is reversed. The final two plates in our copy are not part of the Libro dei globi but are added and appear to be pattern plates for globe makers. Father Vincenzo Coronelli (1650-1718) was a Minorite friar who was an exceptional cartographer and globe maker. His first pair of globes were made for the Duke of Parma, and this led to his being commissioned to create a pair of globes for Louis XIV. They were completed after two years’ work in 1683, and were the largest globes ever made until the 1920s; they were 3.87-meters in diameter and each weighed two tons (they are now in the Bibliothèque nationale in Paris). Upon his return to Venice in 1684 he founded Europe’s first geographical society, the Accademia Cosmografica degli Argonauti. He was appointed Cosmographer of Venice, and produced a series of globes, atlases, and maps notable for their accuracy and detail." (Martayan Lan, W.P. Watson, 2020). Georeferencing of globe gores done by Cartography Associates in 2021. Gores georeferenced in Polyconic projection, then converted to Geographic, and other projections. "Mostly celestial globes show the starry sky as it would appear to an observer from space. The constellations can then all be seen in mirror image, so that orientation is difficult for the viewer. Vincenzo Coronelli, on the other hand, reproduces the constellations on this globe as they appear from the earth and therefore in the perspective we are familiar with." (catalog Bayerisches Nationalmuseum). Interestingly, gore 42 is not reversed - the counter-proof gore was never made, yet the gore does not have any text applied and it is a very dark impression so we must assume that it was ready to make the counter-proof but for some reason it was not done. For our digital version we have reversed the plate image to create our own digital counter-proof.
Pub List No:
10714.000
Pub Type:
Globe Gores
Pub Height cm:
40
Pub Width cm:
26
Image No:
10714005.jp2
Authors:
Coronelli, Vincenzo (1650-1718)
